Get Setting - ID Tech SecureMag User Manual

6.3. Get Setting

The Get Setting command retrieves the reader's current settings.
Command
<STX> <R> <FuncID> <ETX> <LRC 1>
Response
<ACK> <STX> <FuncID> <Len> <FuncData> <ETX> <LRC 2>
<FuncID>, <Len> and <FuncData> retrieves the reader's current settings.
Where:
Characters Hex Value
<STX>
<ETX>
<ACK>
<NAK>
<UnknownID>
<AlreadyInPOS>
<R>
<S>
<LRC>
Reader Command Summary
ASCII HEX
38
'8'
39
'9'
46
'F"
49
'I'
4D
'M'
50
'P'
51
'Q'
52
'R'
53
'S'
Description
Start of Text
02
End of Text
03
Acknowledge
06
15 for RS232 and Negative Acknowledge
USB HID interface; FD
for USB KB interface
Warning: Unsupported ID in se
16
Warning: Reader already in OP
17
mode.
Review Setting
52
Send Setting
53
- Xor'd all the data before LRC.
Name Use
Copyright Report Requests reader's copyright
notice.
Version Report Requests version string.
Key Loading Special command to load
encryption keys.
Reader Reset Reset the reader. Software reset
does not resend startup string
OPOS/ JPOS Command to enter OPOS or JPOS
Command mode.
Arm and Disarm Arm to Capture Buffer Mode
to Read MSR.
Read Buffered Read Stored MSR Data.
Data
Read MSR Read various reader optional
Options settings.
Set MSR Options Set various reader optional
functions.
SecureMag Encrypted MagStrip Reader User Manual
Page | 11