9.3. Reader Operations
The demo software can be used to display the card data and send reader commands. To view the
card data on screen, place the cursor in the Manual Command/ Reader Output text box and swipe the
card. To send a reader command, type the appropriate command in the text box and press the Send
Command button.
General Settings
•
Provides options such as reader default settings, firmware version, beeper options, and
buffered mode options. For USB demo software, there are options to set the reader to USB
KB or USB HID mode.
MSR Security
•
The security is enabled by selecting TDES or AES. Once the encryption is enabled the reader
cannot be changed back to non-encrypted mode.
Port and Settings
•
RS232 Interface: select Com port, open and close port.
USB KB Interface: set KB polling interval and select language settings
Help
•
Provides version information of the demo software.
SecureMag Encrypted MagStrip Reader User Manual
Page | 24