Table of Contents
Advertisement
14. Appendix B: Setting Configuration Parameters and Values
The following is a table of default setting and available settings (value within parentheses) for each
Function ID.
Function ID
Hex
10
HTypeID
11
BeepID
12
ChaDelayID
13
TrackSelectID
14
PollingInterval ID
15
DataFmtID
16
FmtOptionID
17
TrackSepID
19
SendOptionID
Description
Default Setting
'0' ('0'~'2','4'~'6')
Terminal Type
'2' ('0'~'4')
Beep Setting
Beep Frequency
And Duration
'0' ('0'~'5')
Character Delay
'6'
'0' ('0'~'9')
Track Selection
0x30 – Any Track
0x31 – Track 1 Only
0x32 – Track 2 Only
0x33 – Track 1 & Track
2
0x34 – Track 3 Only
0x35 – Track 1 & Track
3
0x36 – Track 2 & Track
3
0x37 – All Three Tracks
0x38 – Track 1 Or Track
2
0x39 – Track 2 Or Track
3
1 (1 ~ 255)
Polling Interval
'0' ('0'~'2')
Data Output
Format
H'59'
UIC, Mag-Tek
0x0D=CR/Enter
Track Separator
'1' ('0'~0x3F)
Send Option
SecureMag Encrypted MagStrip Reader User Manual
Description
PC/AT, Scan Code Set 2, 1, 3,
PC/AT with external Keyboard
and PC/AT without External
Keyboard
'0' no beep; '1' low long; '2' high
long; '3' high short; low short;
2 ms inter-character delay
'6 for 0 mS delay
Any Track 0-any; 1-7—bit 1
tk1, bit 2 tk2; bit 3 tk3. '8'—
tk1-2; '9' tk2-3
If a track is not selected in a
secure reader that track is not
processed or recognized.
USB HID Polling Interval
0'-ID TECH Format; '1'-UIC; '2'-
Mag-Tek Format
Refer to MiniMag RS232 User's
Manual
CR for RS232, Enter for KB any
character supported except 00
which means none.
Sentinel and Account Number
Control
0x30 -Does not send start/end
sentinel and sends all data on
Track 2, not an error
notification. Control Key
Output.
0x31 - Sends start/end sentinel
and all data on Track 2, does
not send an error notification.
Control Key Output.
0x32 – Does not send start/end
sentinel and only sends account
number on Track 2. Does not
Page | 55
kr
k
u
Advertisement
Table of Contents
