Table of Contents
Advertisement
1A
MSRReadingID
1B
DTEnableSendID
1D
DecodingMethodID
1F
ReviewID
21
TerminatorID
22
FmVerID
23
USBHIDFmtID
24
ForeignKBID
30
CustSetID
34
Track1PrefixID
'1' ('0'~'3')
MSR Reading
'0'('0','1','3')
DT Enable Send
'1' ('0'~'3')
Decoding
Direction
None
Review All
Settings
0x0D (any)
Terminator
None
Firmware
Version
'0' ('0'~'1', '8')
USB HID Fmt
(HID rdr only)
'0' ('0' ~0x3A)
Foreign KB
00(00-07)
Custom
Customer
Settings
0 (any string)
Track 1 Prefix
SecureMag Encrypted MagStrip Reader User Manual
2, and sends error notification.
Alt Key Output.
0x3e – Does not send start/end
sentinel, only sends account
number on Track 2, and sends
error notification. Alt Key
Output.
0x3f - Sends start/end sentinel,
only sends account number on
Track 2, and sends error
notification. Alt Key Output.
Enable/Disable MSR Reading
0x30 – MSR Reading Disabled
0x31 – MSR Reading Auto
Mode Enabled 0x32 – MSR
Reading Buffered Mode
Enabled
0x33 Auto MSR Buffered Mode
Enabled
Data Editing Control
0x30 – Disable Data Edit.
0x31 – Data Edit Match mode.
0x33 – Data Edit Un-match
mode
Reading Direction
0x30 – Raw Data Decoding in
Both Directions.
0x31 – Decode in Both
directions.
0x32 – Moving Stripe Along
Head in Direction of Encoding.
0x33 – Moving Stripe Along
Head Against Direction of
Encoding.
CR for RS232, Enter for KB
'0' ID TECH Format; '1' Mag-Tek
Format; '8' HIDKB format
Foreign Keyboard
.0 POS-X: Level 3 Non-CC send
same as Level1
.1 Level 3: No empty pkt when
not enough sampling bits .2
Enhanced Secured Output will
have SN after hash
No prefix for track 1, 6-
character max
Page | 57
id
i
ur
k
i
Advertisement
Table of Contents
