fantastic furniture MONACO Lowline Large Manual page 7

Step 5
You will need
4 x Screw
Allen Key
(H8) (H17)
Position the Left Divider Panel (P5) and
the Right Divider Panels (P6) to the
Bottom Panel (P2), so that their bare
edges are aligned with Bottom Panels
Groove Edge, and cam nut holes are
furthest away from Bottom Panel as
shown.
Fit the Panels together.
Screw in 4 x Screws (H8) into Bottom
Panel (P2)
using Allen Key (H17).
Step 6
You will need
4 x Cam
Flat head
Nut (H2)
screwdriver
Position Left Side Panel (P3) and Right Side Panel (P4) onto Bottom Panel (P2), so that their grooves are aligned.
Insert 4 x Big Cam Nuts (H2) into Bottom Panels (P2) and turn clockwise to lock.
www.fantasticfurniture.com.au
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
(P3)
(P2)
PAGE 7
(P4)