Advertisement
Step 11
You will need
4 x Screw
4 x Back Panel
Connector (H15)
(H16)
Phillips head
screwdriver
If necessary, gently adjust the Top Panel (P1) sideway in either direction until XX and YY are equal.
Fix the Back Panel Connectors (H15) with Screws (H16) as shown.
Step 12
You will need
Phillips head
screwdriver
We strongly advise that
you use the wall safety
Bracket provided to
prevent the unit toppling.
Screw and Wall Plug are not
provided.
Please use appropriate
fixtures for your wall.
Move the TV Stand to the final position.
Mark fixing hole on wall and remove TV stand.
Follow the instructions provided for the wall
fittings to mount the fittings to the wall.
Reposition TV stand and fix the safety Wall
Bracket (H12) to the wall.
Make sure it is firmly attached.
Fully tighten the screw (H6) on the Wall Bracket
(H12) to the Top Panel (P1).
www.fantasticfurniture.com.au
XX
XX = YY
(P4)
H12
(P1)
H6
(P10)
YY
(P1)
YY
(P10)
XX
Seek advice from a qualified
trades person on how to
attach this safety Bracket to
your specific wall.
(P1)
PAGE 10
Advertisement
