Advertisement
Step 1
You will need
8 x Cam
1 x Wall
Bracket (H12)
Bolt (H1)
1 x Screw
Phillips head
(H6)
screwdriver
Step 2
You will need
4 x Cam
4 x Wood
Dowel (H4)
Bolt (H1)
Phillips head
Mallet
screwdriver
Insert 2 x Wood Dowels (H4) into Right Side Panel (P4).
Screw 2 x Cam Bolts (H1) into Right Side Panel (P4).
www.fantasticfurniture.com.au
x
Insert 2 x Wood Dowels (H4) into Left Side Panel (P3).
Screw 2 x Cam Bolts (H1) into Left Side Panel (P3).
(P1)
Screw 8 x Cam Bolts (H1)
into Top Panel (P1) as shown.
Fasten Wall Bracket (H12) on Top Panel (P1)
with screw (H6).
Do not fully tighten the Screw (H6).
(P3)
(P4)
PAGE 5
Advertisement
