User Interface; Keyboard Commands - Emerson XM670K Installing And Operating Instructions
Controllers for multiplexed cabinet
Hide thumbs
Also See for XM670K:
- Installing and operating instructions (10 pages) ,
- Installing and operating instructions (10 pages)
Table of Contents
Advertisement
6
User Interface
6.1.
Icons
Light
Defrost
Energy Saving
Generic alarm
DURING PROGRAMMING: The measurement units of temperature and pressure will blink.
6.2.
Keyboard Commands
Single commands:
• LIGHT relay: Press the light button
• AUX relay: Press the down arrow button
• Manual defrost: Press the defrost button for three (3) seconds
• ON/OFF: Press the ON/OFF button for three (3) seconds (if the function is enabled)
• Energy Saving: Press the ON/OFF button for three (3) seconds (if the function is enabled)
Document Part # 026-4280 Rev 1
©2022 Emerson Digital Cold Chain, Inc. This document may be photocopied for personal use.
Visit our website at www.climate.emerson.com for the latest technical documentation and updates.
Figure 6-1 - XM670K Display
Cooling Output
Fan
Auxiliary relay
Multimaster enabled
Clock/time
Table 6-1- XM670K Display Icons
The output is activated when the icon is ON. A delay
is present when the icon is blinking.
MEASUREMENT UNIT
°C, Bar, and
(time) are ON depending on the
selection.
Page 6 of 33
Advertisement
Table of Contents
