Assembly Instructions - ADB Signature Series L-860 Manual

Low-intensity elevated edge light

Hide thumbs Also See for Signature Series L-860:

Table of Contents

L860 Elevated Low-Intensity Edge Light

3. Assembly Instructions

NOTE: The L-860 ELIL elevated light is assembled at the factory. Use

the assembly instructions below when you need to disassemble/

assemble parts for repair or maintenance purposes.

To assemble parts, perform the following procedure:

1. See Figure 7-2 and repair/replace components in Section 6

starting on page 6-1. Also see Parts List and recommend Spare

Parts List in Section 7.

NOTE: Apply a light coat of anti-seize compound on the locking

ring threads to make assembly and disassembly easier.

2 Insert the wiring through the column and the frangible coupling

and secure both with the hex screws.

96A0388B

Issued 6/08

Troubleshooting

Page 4-2

Table of Contents

Signature series l-860e