Specifications; Input; Expected Led Life; Light Source - ADB Signature Series L-860 Manual

L860 Elevated Low-Intensity Edge Light
2. L-860 LED Elevated Light
Fixture: Required
Equipment
(contd.)

3. Specifications

Input

Expected LED Life

Light Source

Environmental Operating
Conditions
© 2008 Siemens Airfield Solutions
All rights reserved

Table 2-3 Required Equipment Not Supplied

Description
Torque wrench (0 to 200 inch-pounds)
Loctite number 243 or equivalent
L-867B light baseplate with 1-1/2−12 UNF or L-867B
or L-867D light base with 2-inch NPT. Baseplates are
supplied with gasket and mounting bolts.
Optional mounting uses a L-867B with a 2-11 NPS
hub for ICAO application (supplied with gasket and
mounting bolts)

Table 2-4 Power Requirements

For a...
Voltage – parallel circuit
w/o heater
Voltage – parallel circuit
w/heater (arctic kit)
ELIL Fixture
w/o heater
w/heater (arctic kit)
See Table 2-4
Up to 100,000 hours
3 Watt high lumen density (brightness) white LED
1-Watt high brightness Red and Green LEDs
The L-860 light fixture is designed to operate under the conditions
presented below for temperature, wind, altitude, and relative
humidity.
Temperature
-40 to +55°C (-40 to +131°F)
Wind
Velocities up to 350 mph (560 kph)
96A0388B
Issued 6/08
Description
Power Source
95Vac (min.) to 264Vac (max.), 50/60Hz
120Vac, ±10%, 50/60Hz
Fixture Load
Power Fixture Load
95-264Vac 7W (14VA)
120Vac 22W (29VA)
Quantity
1
(if
required)
As required
1
(if required)
Page 2-3