Warranties - ADB Signature Series L-860 Manual

L860 Elevated Low-Intensity Edge Light

Warranties

© 2008 Siemens Airfield Solutions
All rights reserved
WARRANTY FOR GOODS AND SERVICES: Seller warrants, to the
extent to which any of the same may be applicable, that (a) on
the date of shipment the goods are of the kind and quality
described herein and are free of non-conformities in
workmanship and material, (b) the engineering services
performed by it will be performed in accordance with generally
accepted professional standards, (c) any specialized tools,
equipment and instruments for the use of which a charge is made
to the Buyer shall be adequate for the work to be performed and
(d) any replacement or other parts furnished by it or any work
done by it on the Buyer's equipment or both shall be free of
defects in workmanship and materials. This warranty does not
apply to goods delivered by Seller but manufactured by others.
Buyer's exclusive remedy for any failure of the goods or services
to conform to any of the applicable warranties shall be to have
Seller re-perform services, repair or replace (at Seller's option) the
nonconforming item and any affected part of the goods provided
by Seller. Seller's obligation to re-perform services or to repair or
replace goods shall be in effect for a period of one (1) year from
initial operation of the goods or completion of Services but not
more than eighteen (18) months from Seller's shipment of the
goods. Seller shall correct any failure to conform to any of the
applicable foregoing warranties of which it is notified in writing
within that period of time specified.
Repaired and replacement parts and repair services shall be
warranted for the remainder of the original period of notification
set forth above, but in no event less than 12 months from repair
or replacement. In the case of any other breach of the foregoing
warranty, Seller shall furnish engineering services or specialized
tools, equipment and instruments, to the same extent as on the
original work. Buyer shall grant Seller access to the goods or
services at all reasonable times in order for Seller to determine
any nonconformity in the goods or services. It is understood and
agreed that, unless otherwise agreed to in writing by Seller, Seller
assumes no responsibility with respect to the suitability of the
Buyer's equipment or any latent defects in the same. In no event
shall Seller be responsible for providing working access to the
defect, including the removal, disassembly, replacement or
reinstallation of any equipment, materials or structures to the
extent necessary to permit Seller to perform its warranty
obligations, or transportation costs to and from the Seller factory
or repair facility, or for damage to equipment components or
parts resulting in whole or in part from improper maintenance or
operation or from their deteriorated condition. Seller shall have
the right of disposal of items replaced by it. If Seller is unable or
unwilling to repair or replace, or if repair or replacement does not
remedy the nonconformity, Seller and Buyer shall negotiate an
equitable adjustment in the contract price, which may include a
full refund of the contract price for the nonconforming goods or
services. All warranty work shall be performed in a single shift
straight time basis Monday through Friday. In the event the Buyer
requires correction of warranty items on an overtime schedule,
the premium portion of such overtime shall be for the Buyer's
account.
THIS IS SELLER'S SOLE GUARANTEE AND WARRANTY WITH RESPECT
TO THE GOODS AND SERVICES. THERE ARE NO OTHER EXPRESS OR
IMPLIED WARRANTIES OR WARRANTIES OF FITNESS FOR ANY
96A0388B
Issued 6/08
Warranties
Page v