L860 Elevated Low-Intensity Edge Light
Section 2
Description
1. Introduction
© 2008 Siemens Airfield Solutions
All rights reserved
This section describes the ADB Airfield Solutions Signature Series™
L-860 ELIL elevated edge LED light that is used to delineate the edges
of general aviation runways that require non-precision
instrumentation on runways. These elevated lights are ETL certified
according to FAA specification AC 150/5345-46C, and FAA LED
specifications per FAA Engineering Brief 67B. The ELIL also meets the
requirements for ICAO
precision instrument runway. The ELIL can be supplied with or
without a heater (arctic kit).
NOTE: Signature Series is a trademark of ADB Airfield Solutions.
LED Assembly
Locking Ring
Assembly
Column
Figure 2-1 L-860 ELIL FAA Elevated Edge Light
Annex 14, Vol. 1 para. 5.3.5 for use on a non-
96A0388B
Issued 6/08
Description
Glassware
Assembly
Attachment Ring
And Button Head
Allen Head
Lens O-ring Seal
Housing
Hex Bolts
Frangible
Coupling
Page 2-1