Advertisement
Assembly
STEP 15:
Attach two Pulleys (#21) to Upright (#3) & Seat Support (#6) using:
• 2 x Button Head Cap Screw (#33)
• 2 x Nylon Locknut (#37)
• 4 x Flat Washer (#31)
• 4 x Pulley Spacer (#29)
STEP 16:
Attach the Short Bar (#13) to the Low Pully Cable (#17) using:
• 2 x Gear Hook (#40)
• 1 x Long Chain 12 (#18)
STEP 17:
Attach the Long Bar (#19) to the High Pully Cable (#15) using:
• 2 x Gear Hook (#40)
• 1 x Short Chain 4 (#16)
NOTE: Hand tighten bolts and Nylon Lock nuts until machine is fully assembled.
Advertisement
