Advertisement
Advertisement
Related Manuals for XMark Fitness XM-7626
Summary of Contents for XMark Fitness XM-7626
- Page 1 XM-7626 FUNCTIONAL TRAINER Owner’s Manual 8/09...
-
Page 2: Table Of Contents
Table Of Contents Important Safety Information Before You Start Assembly 5-12 Weight Stack Sticker Placement Parts List Exploded View Warranty Information... -
Page 3: Important Safety Information
SAFETY PRECAUTIONS • This unit should only be used on a level surface and is intended for indoor use only. XMARK Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning. -
Page 4: Before You Start
This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our XMARK Fitness help line. We have trained service technicians on site to take care of you, our valued customer. -
Page 5: Assembly
Assembly... - Page 6 Assembly NOTE: Hand tighten bolts and Nylon Lock nuts until machine is fully assembled. Step 1 Connect the Left frame(#1)and the Right frame (#2) with two Rear beam (#4) using: • four M10*80 Button Head Cap Screw (#55) • four M10*75 Button Head Cap Screw (#56) •...
- Page 7 Assembly NOTE: Hand tighten bolts and Nylon Lock nuts until machine is fully assembled. Step 2 Attach the Main top beam (#3) to the Left frame (#1) and the Right frame (#2) using: • four M10*105 Button Head Cap Screw (#52) •...
- Page 8 Assembly NOTE: Hand tighten bolts and Nylon Lock nuts until machine is fully assembled. Step 3 Attach: • two Guide Rod (#19) • two Φ62*Φ58*Φ25.2*25 Weight bumper (#37) • five Weight plate 15LB (#39) • nine Weight plate 10LB (#40) •...
- Page 9 Assembly NOTE: Hand tighten bolts and Nylon Lock nuts until machine is fully assembled. Step 4 Attach the Left slip frame (#5) to the Left slip tube (#13). Attach the Left slip tube (#13) and the Front support frame (#69) to the Left frame (#1) using: •...
- Page 10 Assembly NOTE: Hand tighten bolts and Nylon Lock nuts until machine is fully assembled. Step 5 Attach one Pulley Cable (#8) to the Left Frame (#1). Attach two 4.5" Pulley (#33) to the Left Frame (#1) using: • two M10*50 Button Head Cap Screw (#57) •...
- Page 11 Assembly NOTE: Wrench tighten bolts and Nylon Lock nuts. Step 6 Attach four Shroud bracket (#12) to the Left frame (#1) using: • two M10*100 Button Head Cap Screw (#53) • four Φ11*Φ20*2 Flat washer (#60) • two M10 Nylon lock nut (#64) Attach two Weight shroud (#11) to the Left frame (#1) using: •...
- Page 12 Assembly Tighten all hardware securely. Congratulations! You have completed the assembly of your new XM-7626.
-
Page 13: Weight Stack Sticker Placement
Weight Stack Sticker Placement The weight stack image below illustrates how the weight stack decals should be applied to the weight stack. Please note these decals should not be put on until the entire unit has been assembled and all bolts and nuts have been tightened. 200 LB Stack... -
Page 14: Parts List
Tube Slip Left XM-7626 P00661 Tube Slip Right XM-7626 P00263 Stopper, Rubber XM-7626 P00264 Bracket, Cable Retainer XM-7626 P00265 Pad, Big Base Right XM-7626 P00266 Pad, Big Base Left XM-7627 P00267 Guide Rod, XM-7626 P00268 Strap, Leg Extension/Curl P00098 Handle, Long Strap XM-7626... -
Page 15: Exploded View
Exploded View... -
Page 16: Warranty Information
VALID ONLY if the product is assembled / installed according to the instructions / directions included with the product. • In a light institutional setting, XMARK Fitness will extend a one year limited parts warranty and a lifetime frame warranty to the original purchaser. - Page 17 XMARK Fitness 7501 Trammel Drive Shreveport, LA 71108 Customer Service: 1-800-719-4605...
Need help?
Do you have a question about the XM-7626 and is the answer not in the manual?
Questions and answers