Festo CPX-CMXX Brief Description page 25

2.6 Power supply of the CPX-CMXX
The power supply for the CPX-CMXX is provided via the
manifold sub-base.
– The CPX-CMXX is supplied via the operating voltage for
the electronics and sensors.
– The load voltage supply for the valves and digital
outputs is not required.
The CPX-CMXX can therefore be combined with all
manifold sub-bases.
– Manifold sub-base without supply
– Manifold sub-base with system supply if the space
below the modules to the left of the CPX-CMXX is not
sufficient for the system supply
– Manifold sub-base with additional supply if the
module to the right of the CPX-CMXX requires an
additional supply, but the space is not sufficient for the
additional supply.
Please note
Further information on the power supply and the
manifold sub-bases can be found in the CPX system
manual P.BE-CPX-SYS-...
Festo CPX-CMXX 1102b English 25