English - Festo CPX-CMXX Brief Description

English - Multi-axis interface CPX-CMXX
The multi-axis interface CPX-CMXX has been designed
exclusively for use in CPX terminals and serves for
coordinating drive units from Festo. The maximum values
specified in the section "Technical specifications" must be
observed here.
Detailed information can be found in the manual for the
CPX-CMXX (P.BE-CPX-CMXX-...) as well as in the CPX
system manual (P.BE-CPX-SYS-...).
Warning
S Switch off the power supply before connecting or
disconnecting plugs (otherwise this could lead to
functional damage).
S Use only power units which guarantee reliable
isolation of the operating voltage as per IEC 742/
EN 60742/VDE 0551 with at least 4 kV isolation
resistance (Protected Extra Low Voltage PELV). Switch
power packs are permitted, providing they guarantee
reliable isolation as per EN 60950/VDE 0805.
S Connect an earth conductor of sufficient cross-
sectional area to the connection on the CPX terminal
marked with the earth symbol.
S The CPX-CMXX contains electrostatically sensitive
components. Do not therefore touch any contacts.
Observe the handling specifications for electrostati-
cally sensitive components.
Please note
Commission only a CPX terminal which has been fitted
and wired completely.
Festo CPX-CMXX 1102b English 15