Festo CPX-CMXX Brief Description page 22

2.3 Setting the RUN/STOP rotary switch
Please note
Leave the RUN/STOP rotary switch at position "0"
(STOP) during installation.
Setting
0 = STOP
The CPX-CMXX is stopped when the RUN/STOP
rotary switch is switched from 1 ... F to 0.
The Stop LED lights up yellow.
1 ... F = RUN
CPX-CMXX started. The RUN LED lights up
green. The switch positions 1 ... F have no
further function.
Modifications to the position of the RUN/STOP rotary switch are trans-
mitted to the controller with a delay of 500 ms.
22
Rotary switch
Festo CPX-CMXX 1102b English