Throttle Pedal; Foot Brake Pedal; Park Brake; Transmission Shift Lever - Taylor-Dunn Tiger TC-030-60 Operation, Maintenance, And Replacement Parts Manual

SAFETY RULES AND OPERATING INSTRUCTIONS

1) Throttle Pedal

The throttle pedal is located on the floorboard and is intended to
be operated by the drivers right foot. It controls the speed of the
vehicle and operates similar to the throttle pedal in an automobile.
Depress the pedal to increase speed and release the pedal to
decrease speed.

2) Foot Brake Pedal

The foot brake pedal, is located to the left of the throttle pedal and
is intended to be operated with the drivers right foot only. It works
similar to the brake in an automobile. Applying pressure to the
brake pedal slows the vehicle according to the amount of pressure
applied. Relieving pressure from the pedal releases the braking action.

3) Park Brake

The parking brake is actuated with a hand lever, which is located to the right of the driver. To set the parking brake,
push down on the brake pedal and pull the lever up until it locks. To release the park brake, depress the foot brake
pedal, pull up on the park brake handle, push the release button, and lower the handle.

4) Transmission Shift Lever

Selects the direction of travel and gear range. Detailed description of operation is in the Vehicle Operation section
later in this chapter.

Steering

The steering wheel and steering system are similar to an automobile. To
turn right, turn the steering wheel clockwise. To turn left, turn the steering
wheel counter-clockwise.
Safety Rules and Operating Instructions: MT-030-60-C
Page 7