Appendix A: Suggested Torque Limits For Standard Hardware; Hardware Identification; Standard Head Markings; Hex Bolts - Taylor-Dunn Tiger TC-030-60 Operation, Maintenance, And Replacement Parts Manual

Appendixes
APPENDIX A: SUGGESTED TORQUE LIMITS FOR STANDARD
HARDWARE

HARDWARE IDENTIFICATION

Standard Head Markings

NOTE: Torque value used should be for lowest grade of hardware used. If a grade 2 nut is used on a
grade 8 bolt, use grade 2 torque value.
NOTE: Toque values specified are for clean dry threads.

Hex Bolts

S.A.E. Grade 2
S.A.E. Grade 8

Other Bolts

Carriage Bolt, grade 2
(unless marked as above)
Appendixes
Appendix B
Page 2
S.A.E. Grade 5
L'9
L'9
The grade of a metric bolt is cast directctly on the
head. Below is an example of a 10.9. the location
and style of the text will vary.
Truss Head, grade 2
*Not available at time of printing