Heater Blower Switch; Heater Water Valve; Windshield Wiper Switch; Instrument Panel (Continued) - Taylor-Dunn Tiger TC-030-60 Operation, Maintenance, And Replacement Parts Manual

SAFETY RULES AND OPERATING INSTRUCTIONS

INSTRUMENT PANEL (CONTINUED)

10) Heater Blower Switch

The blower switch has 4 positions:
OFF: The blower is OFF when the switch indicator is
pointing straight up.
1: Blower low speed.
2: Blower medium speed.
3: Blower full speed.

11) Heater Water Valve

The heater water valve is used to route the hot engine
coolant through the heater core. Pull the valve out all of
the way for maximum water flow and maximum heat.
The valve can be positioned to control the amount of hat
coolant and heat through the heater core.

12) Windshield Wiper Switch

Lift the switch handle up to turn on the windshield wiper
and push it down to turn it off.
The wiper motor does not have an automatic park
position. When turning the wiper off, be sure that the wiper
blade in not blocking the drivers view.
Safety Rules and Operating Instructions: MT-030-60-C
Page 6

13) 12 Volt Electrical Outlet

This outlet can be used to plug in optional electrical
accessories.

14) Warning Light, Hydraulic Pressure

This light will come if the hydraulic system pressure is
too low.
If the light comes on, then the engine should be stopped
and the vehicle should be immediately removed from
service to be inspected by a qualified technician.