Table of Contents
Advertisement
DosimetryPRO
Nominal
resolution
1k x 1.25k
2k x 2.5k*
4k x 5k
*ACR Standard for Teleradiology [Revision 35 (1998)] recommends 2.5 lines pairs/mm minimum
Scan modes
Film sizes
Auto film feeder Standard 25-film capacity (mixed sizes, no presorting)
19196-001 Rev. D
®
Advantage specifications
Pixels
Spot size
(14"x17" film)
(µm)
997 x 1211
356
1995 x 2422
178
3990 x 4845
89
32-bit mapped to 12-bit and 8-bit grayscale outputs
Manual Feed:
Width:
6" to 14" (15.24cm to 35.56cm)
Length:
7" to 51"† (17.78cm to 129.54cm)
Thickness:
0.005" to 0.009" (0.127mm to 0.228mm)
†Films longer than 17" require user support during feeding, and a scanning application that handles long
films
"Light box" loading: head-up, normal reading, left justified
Width:
7" to 14" (17.78cm x 35.56cm)
Length
7" to 17" (17.78cm x 43.18cm)
Thickness:
0.005" to 0.009" (0.127mm to 0.228mm)
Note: ISP 14" x 17" is cut true to size and is therefore slightly
larger than standard 14" x 17" film (which is actually measured
in metric and therefore slightly smaller). This results in a very
tight fit between the digitizer's film guides. In most cases, the
films can be manually loaded and may need to be assisted
through the device. In the worst case, the film may need to be
slightly trimmed before feeding. Films will not be properly fed
using the automated film feeder.
VIDAR Advantage Series User's Guide
DPI
Line pairs
per mm
71.25
1.4
142.5
2.8
285
5.6
8
Advertisement
Table of Contents
