6. Prepare the Feeder
19196-001 Rev. D
®
CAD PRO
Advantage ONLY
a. Secure the film feeder Suction Cup Arm using the foam wedge as shown below.
Front of feeder
Inside of feeder
Bottom of feeder
Feeder with wedge inserted should look like this:
b. Place the film feeder in a plastic bag. Seal the bag with tape.
VIDAR Advantage Series User's Guide
Wedge
2
Then slide wedge into opening
and under bar with other hand
1
Gently lift and hold suction
cup arm with one hand...
3
Slide slot in wedge over metal
edge on bottom of feeder
Wedge
39