Pack The Shipping Carton - 3D Systems VIDAR AdvantagePRO Series User Manual

9. Pack the Shipping Carton

19196-001 Rev. D
a. Place the items shown in the shipping carton, as shown here. Orient the items as
shown.
b. Close the shipping carton and seal it with tape.
Note: If you are shipping the digitizer to VIDAR for repair or
any other reason:
1. Obtain a Returned Materials Authorization (RMA) number by
sending an e-mail request to medtech@3dsystems.com.
Include the digitizer's serial number and the reason for
return.
2. Write the RMA number on the box or shipping label. If the
shipment does not have an RMA, processing will be delayed
when it reaches VIDAR.
VIDAR Advantage Series User's Guide
Upper foam support
5
Feeder
4
Note: For clarity, this
illustration does not show
the plastic bags surrounding
Digitizer base
the digitizer and feeder.
3
Lower foam support
2
Accessory box
1
Shipping carton
44