Table of Contents
Advertisement
Caution: Medical electrical equipment.
EMC (Electro Magnetic Compatibility) must be considered before any medical electrical equipment is installed or
put into service. Follow the information in the accompanying documentation when installing and operating the
VIDAR Digitizer.
Caution: Portable or mobile RF communication equipment can effect Medical Electrical equipment.
Caution: Using the Digitizer adjacent to or stacked with other equipment may cause interference between the
equipment. Before utilizing stacked or adjacent equipment, verify proper functionality of all equipment in the
actual configuration in which it will operate.
Caution: Connecting the Digitizer to equipment that is not rated CISPR 11 class A or class B may alter the
electromagnetic characteristics.
Caution: In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
The DiagnosticPRO Advantage, DosimetryPRO Advantage (Red) and CAD PRO Advantage Digitizers are intended for
use in the electromagnetic environment specified below. The customer or end user of the Digitizer should assure that it is
used in such an environment.
Emissions test
RF Emissions
CISPR11
RF Emissions, CISPR11
Harmonic Emissions
IEC 61000-3-2
Voltage Fluctuations/
flicker emissions
IEC 61000-3-3
19196-001 Rev. D
Guidance and manufacturer's declaration –
electromagnetic equipment
Compliance
Electromagnetic environment - guidance
The Digitizers use RF energy only for their internal functions.
Group 1
Therefore, its RF emissions are very low and are not likely to cause
any interference in nearby electronic equipment.
Class A
The Digitizers are suitable for use in all establishments other than
Class A
domestic and those directly connected to the public low voltage
power supply network that supplies buildings used for domestic
purposes.
Complies
VIDAR Advantage Series User's Guide
Appendix:
Electromagnetic Guidance
Table 201
45
Advertisement
Table of Contents
