Packing The Film Digitizer For Shipment; Turn Off The Digitizer; Disconnect The Power Cord And Usb Cable - 3D Systems VIDAR AdvantagePRO Series User Manual

1. Turn Off the Digitizer

2. Disconnect the Power Cord and USB Cable

19196-001 Rev. D
Packing the Film Digitizer
IMPORTANT: When shipping the film digitizer, you must use
the original packing materials, including wire ties, plastic bags,
plastic wrap, foam supports and cartons. Improper packaging
may allow damage to the digitizer, which will incur additional
charges for repair.
Press "0" on the power switch.
a. Disconnect the power cord from the Power
Entry Module on the rear of the digitizer.
b. Disconnect the USB cable from the rear of
the digitizer.
VIDAR Advantage Series User's Guide
for Shipment
USB cable
Power cable
35