Cleaning the Auto-Feed Roller
19196-001 Rev. D
Preventive Maintenance
®
DiagnosticPRO
Advantage and DosimetryPRO
After extensive use, dust or lint particles may build up on the Auto-Feed Roller. VIDAR
recommends cleaning the roller at least twice per year.
Loop a piece of light adhesive tape (such as
Scotch® Magic™ Tape) around your fingers
with the adhesive side out, then gently pat the
roller. Pat and turn the roller until its entire
surface is clean.
CAUTION:
Do not use any type of cleaning solvent on the feed roller
and idler wheels, as this could damage these components
and cause improper operation.
Do not use tape with a strong adhesive, such as packing
tape or strapping tape.
Do not use tape requiring the adhesive to be wetted, such as
brown paper packing tape.
VIDAR Advantage Series User's Guide
®
Advantage ONLY
Auto-Feed Roller
21