Winterizing Your Streamline Pool; Water Quality Error Codes - Endless Pools STREAMLINE User Manual

7. Winterizing the Streamline Pool
A StreamLine Pool may be used year round, even in colder cli-
mates . If you will not be using the pool during the winter in an
area where freezing is a problem, special consideration must be
taken to protect the pool and ancillary equipment if either is locat-
ed outside . If you have any questions regarding precautions to take
against freezing, please call our Customer Service Department at
(800) 910-2714.
13

8. Water Quality Error Codes

Hr
An internal hardware error has been detected in
in .xe . Contact Customer Service .
HL
The system has shut the heater down because the
temperature at the heater has reached 119°F (48°C).
Do not enter the water! Remove the spa cover and
allow the water to cool down, then shut power off
and power your spa up again to reset the system .
AOH
Temperature inside the spa skirt is too high, caus-
ing the internal temperature in the in .xe to increase
above normal limits . Open skirt and wait until error
clears .
FLO
The system does not detect any water flow while
the primary pump is running . Check and open wa-
ter valves. Check for water level. Clean filter. If the
problem persists, call Customer Service .
Prr
A problem is detected with the temperature probe .
Call Customer Service .
OH
The water temperature in the spa has reached 108°F
(42°C). Do not enter the water! Remove the spa
cover and allow the water to cool down to a low-
er temperature . Call Customer Service if problem
persists .
UPL
No low level configuration software has been in-
stalled into the system . Call Customer Service .