Sim Board Components - Sun Microsystems Storage J4200 Replacement Manual

Do not slide a CRU over any surface.
■
Limit body movement (which builds up static electricity) during the removal and
■
replacement of a CRU.

SIM Board Components

Caution – Only trained service personnel should remove the covers on this
equipment.
FIGURE 1
FIGURE 1
1
Figure Legend
1
2
3
4
5
2 Sun Storage J4200 Array SIM Board Replacement Guide • April 2008
illustrates the location of the SIM board components and LEDs.
SIM Board
2
Host or SIM Link IN—Outbound connection to a host, or inbound connection from
another J4200 connection.
Host OUT—Outbound connection to a host.
SIM Link OUT—SAS outbound connector through which data is sent to another J4200.
Serial Management Connector—Left LED—Green—Reserved for Sun Customer
Support Personnel
Serial Management Connector Serial port—Reserved for Sun Customer Support
Personnel
3
7 8 9
4 5 6
10 11 12 13 14