KYOWA WGA-670B Instruction Manual page 45

(8) [PRR]
Contents:
Format:
Parameter:
Return value format:
a) Return value of sensitivity registering value
0x.xxx,±yyyyyy<CR><LF>
b) Return value of smoothing value
a, b, c<CR><LF>
• See SSM command.
c) Return value of additional value
1, ±xxxxxx<CR><LF>
d) Return value of hysteresis set value
xxxxxx<CR><LF>
e) Return value of comparator set value
±xxxxxx<CR><LF>
Outputs set value.
PRRppp<CR>
ppp
010: Sensitivity registering value
020: Smoothing
030: Additional value
050: Hysteresis set value
051: Comparator H set value
052: Comparator L set value
053: Spare
054: Spare
070: Hold mode
090: Auto-ZERO compensation set value
100: Option
Indicates the indicated value with a decimal point. If the indicated value has no decimal
point, it is filled with '0' from the head.
Sensor rated output value (mV/V)
Analog filter set value
Minimum resolution set value
Moving average set value
Indicates the indicated value with a decimal point. If the indicated value has no
decimal point, it is filled with '0' from the head.
Indicates the indicated value with a decimal point. If the indicated value has no decimal
point, it is filled with '0' from the head.
Indicates the indicated value with a decimal point. If the indicated value has no
decimal point, the indicated value is fille with '0' from the head.
40