Table of Contents
Advertisement
b) Hold Display Mode
• Press the HOLD key and the indicated value is kept hold.
After the lapse of delay time, the peak value is detected and indicated for the preset specified time.
Press the HOLD key the 2nd time and the hold display mode is canceled.
• Or, just when the [HOLD] signal from the rear terminal board is turned ON (close), the indicated value
is kept hold.
After the lapse of delay time, the peak value is detected and indicated for the preset specified time.
When the [RESET] signal from the rear terminal board is turned ON (close), the hold display mode is
canceled.
HOLD signal
RESET signal
Note) Even if no RESET signal is issued, it is reset with the next HOLD
signal.
Press the
HOLD-SW
Detecting peak value
Delay time
Specified time
[HOLD] LED ON
Close
Indicated
value
Holding
[HOLD] LED flickers
27
Press the
HOLD-SW
Close
Hide quick links:
Advertisement
Table of Contents
