Configure The Fixture; Rdm Values - ETC Source 4WRD Installation And User Manual

Configure the Fixture

The two-button, seven-segment display shows the DMX address,
AC mode, or the manually-set level. Use the up and down navigation
buttons to configure the fixture.
Set a DMX address: Use the up and down arrows to navigate to the
•
desired DMX address number (1–512).
Set the fixture to use line-dimming (AC mode): Use the down
•
arrow to navigate one number below DMX address 1. The display
will read
Manually set a level: Use the down arrow to navigate one number
•
below
arrow to decrease the level to a percentage of full (
L.98
RDM Values
Parameter
Manufacturer ID
Model ID (120 V)
Model ID (230 V)
DMX Start Address
Personality ID
14
AC
.
AC
. The display will read
= 98%, etc.). You can set levels from 0%–100% (full).
RDM PID
0x6574
0x0800
0x0801
0x00F0
0x00E0
L.FL
(Level = Full). Use the down
Up and down navigation
User interface
Value
Electronic Theatre Controls
ETC Source 4WRD (120 V)
ETC Source 4WRD (230 V)
Range = 1–512
1 = DMX
2 = AC Dimming
3 = Local Control
Source 4WRD Installation and User Manual
L.99
= 99%,