Dometic Frigo Operating Manual page 20

Operation
I
NOTE
Observe the following guidelines for proper operation of the standby
cooling:
The car should be parked in the shade during operation of the
standby cooling.
The user is responsible for securing the vehicle during operation of
the standby cooling!
Prior to loading, cool the loading area for approx. 20 – 30 minutes.
Open the loading area doors just a bit to reduce the entry of moist
air.
The standby cooling is used to maintain the cooling in the loading
area. It is not suitable for long-term storage of foods.
Third-party equipment with 230 V mains voltage may not be oper-
ated on the standby cooling! This may cause damage to the cooling
system!
➤ Turn off the vehicle engine.
➤ Connect the mains cable for parking operation to a fused 230 V socket.
➤ Switch on the cooling system (see chapter "Switching on the cooling system" on
page 9).
I
NOTE
The function of the cooling system and its corresponding operating
elements in the interior correspond to the function during cooling
when driving as described on the previous pages.
With standby cooling in which the electric motor is in a seat console,
sufficient ventilation must be ensured throughout the operation of
the standby cooling.
To this end, fold up the passenger seat during operation of the
standby cooling. Refer to the operating manual of your vehicle in
regard to this function.
20
Frigo
EN