Dometic Frigo Operating Manual page 10

Operation
SET
Figure 3: Switching on the cooling system, compressor
✓ The display then shows the current loading area temperature (1) and the target
temperature (2), and the cooling system is switched on as required, which is rec-
ognisable by the display of the symbols
I
NOTE
With a loading area temperature above +15 °C, initially only the
bol is displayed.
After a delay, the evaporator blower is switched on, which is recognisa-
ble by the display of the
10
1 2 3 4
(3) and (4) on the display.
symbol on the display.
Frigo
sym-
EN