Hybrid Cable, outlet versions
The following outlet versions of the hybrid connector at the Hybrid Cable are possible:
①
②
③
④
⑤
⑥
⑦
Figure 7-7
Note
Hybrid cables with cable outlet at the B end at interface X3
If you use hybrid cables with cable outlet at the B end at the interface X3, then you must use
M12 connectors with a maximum installation length of 50 mm or angled connectors.
SINAMICS S120M Distributed Drive Technology
Manual, (GH12), 12/2014, 6SL3097-4AW00-0BP3
DE of the S120M
NDE of the S120M
Connection for the centrally generated DC link voltage
Connection for the electronic power supply 48 V DC
PE connection
DRIVE-CLiQ connection
Hybrid connector outlet direction, DE or NDE at the S120M
Definition of the outlet version for the hybrid connector
Cabinet design and EMC S120M
7.3 Connection system
127