Zeiss AURA User Manual page 31

AURA handheld NIR
The multiple single measurement mode is therefore often used in
these cases. Whether 5, 7 or more single measurements are necessary
to determine the heterogeneity of the sample must be worked out
individually by the user.
Adapting the AURA product templates
The user can modify AURA product templates and do individual changes
e.g. in the measurement process by entering sample name dialogs,
adapting the number of scans to calculate averages, modifying the result
display on the monitor or integrate new NIR calibrations.
Detailed information on adapting product templates and products can
be found in the InProcess user manual.
Export of measurement results
The measurement results are stored in the measurement history of
InProcess and can be exported to an USB stick at any time. If an USB stick
is used permanently, the results can be immediately and continuously
exported to the USB stick.
As an alternative to USB the integrated WiFi adapter can be used to
connect to an external InProcess client to manage the measurement
results from there. Detailed information on exporting results can be found
in the InProcess user manual.
Installation of additional software
Additional software can only be installed by ZEISS customer service. This
applies for installing a special driver e.g. for a wireless barcode scanner
or for the installation of runtime libraries that are necessary for the use of
calibration files.
User Manual | AURA handheld NIR – 2289-971 and 2298-955
Application note
31