Charging The Battery Pack - Zeiss AURA User Manual

Operation
6.6
Attention
Use the battery charger RRC-SMB-UBC only�
Please read the Technical Data Sheet of the battery charger prior
to the first use� The document can be found at the end of this
User Manual�
Follow the steps listed below to recharge a battery pack:
1. Connect the charger to the main power supply.
2. Insert the battery pack into the charger.
3. The LED shows the charging status
orange:
•
green:
•
Note
To check the charging status of the battery pack, please touch
the switch on the battery pack� The LED bar will show the
charging status�
38

Charging the battery pack

The inserted battery is of the correct type
and is currently being charged.
The battery is charged and can be removed for use.
AURA handheld NIR – 2289-971 and 2298-955 | User Manual
AURA handheld NIR