Input Settings; Remotes - D&R Sirius Manual

Software

7.2.3 Input settings

The 'input settings" box has five more settings directly related to this input.
Control Room Talk-back Mic:
Here you can decide whether this input is the control room talk-back. If so you can use this
Mic input as the talk-back Mic.
Auto talk-back:
When activated the CUE switch on this module shall initiate a talk-back in a way that the
CRM Mic shall be activated as well. If a related output is activated this output also shall be
switched to the CUE buss.
TB/CUE buss input:
This input can be used to connect, for example, a CRM mic to the Sirius system. When this
input is used you don't need to assign the CRM Mic to a module to have TB facilities. When
you enable this setting also the Remote IN CUE selection will be active.
You can now enable the CUE buss input (to the CUE buss) by using an external switch at the
remote input for this particular channel.
EQ active:
Here you can switch the EQ section on or off.
Dynamics active:
Here you can switch the Dynamics section on or off.

7.2.4 Remotes

In the 'remotes" field you can program the remotes belonging to this input.
The following options are programmable:
Momentary:
On switch
CUE
Cough
Fader on
Red-light 1
Red-light 2
Sirius digital Mixer from D&R Phone +31 294 418014, email:
A selection between latching or momentary action for all functions
below.
The ON switch shall be activated.
The Cue switch shall be activated.
The channel shall be muted when remote is active.
Note: this should always be a momentary function.
The fader shall be positioned to unity gain (0dB) or fully down.
Momentary action alternates the two positions (down is 0dB). A latching
action switches between the two positions.
Red-light buss 1 shall be activated.
Red-light buss 2 shall be activated
info@d-r.nl Page 31