Table of Contents
Advertisement
Processing
5.2 EQ
The Sirius has a full four band parametric Equalizer.
The LF band can be used as a low shelving band or as a
"low cut" filter.
The LMF en HMF bands can be used in a "bell" or
"notch" mode.
The HF Band can be used as a high shelving equalizer
or "high cut" filter
All bands have adjustable level, frequency, and
bandwidth with absolute values written in real time on
your screen.
Each band can individually be switched on or off.
An overall EQ on/off switch overrides all individual
on/off EQ switches.
All settings can be done in real time on the Super module by rotating the pots there. Or it can
be done by way of a Mouse movement (the motor-pots will follow) or in case of loading settings
from memory all motor-pots in the Super Module will instantly go to the memory position of
the saved EQ setting.
5.3 Dynamics
Every channel has a dynamics section with a gate and
a compressor. Dynamics can be switched on or off as
a "pair", but also individually a gate can be switched
off or the compressor.
5.3.1 Gate
Gate parameters are Threshold, Ratio, Attack,
Release and Range.
The Threshold adjusts the level the gate opens.
When an input signal is higher than this pre-set level
the gate will open. The Attack controls the speed in
which the gate opens. The Ratio control can be used
to create a downward expander. The 1/20 position
creates a 100% gate function
Sirius digital Mixer from D&R Phone +31 294 418014, email:
info@d-r.nl
Page 10
Advertisement
Table of Contents
