Analog To Digital Unit - D&R Sirius Manual

Interfacing
Every section also provides for a remote connector with two inputs and two outputs. When
input is assigned to a module the corresponding remotes will perform the remote functions.
An overview of the entire pin functions:
Pin # Pin function
1 CC1
2 NC1
3 NO2
4 remote 1 in (0/5 Volt)
5 GND
6 NO1
7 CC2
8 NC2
9 remote 2 in (0/5 Volt)

6.1.5 Analog to digital unit.

The analog to digital input unit provides you with electronics to convert the analog input signals
in very high quality into the digital domain with the proper sample frequency.
The LED's positioned far left indicate status of the AD-unit:
Power indicates power is present
OK indicates software is running.
The unit has four identical sections each reading two channels. The analog audio can be
presented via XLR connectors in left right pairs.
The LED's in these units indicate the status of the digital input:
Active indicates whether the input is in actual use.
Sirius digital Mixer from D&R Phone +31 294 418014, email: info@d-r.nl Page 20