LifeSpan Pursuit 2 User Manual page 9

STEP 3
1. Carefully erect the display and the upright
tubes.
2. Do not damage the display wire when doing
so.
NOTE:
Support the upright with your hand to
avoid the display falling and causing
injury.
STEP 5
1. Place the Water holder (49) into the slots on
the display.
70
64
STEP 4
1. Using the 5# Allen wrench (12), screw in the
Bolt M8*40 (70) and Lock washer (64).
2. Attach the Right Upright Tube to the Main
Frame;
2. Use the 5# Allen wrench (12) to screw Bolt
M8*16 (51) and Lock washer (64) to the base
frame through base and right upright tube.
Repeat this method for the top assembly.
NOTE:
Support the upright with your hands to
prevent it falling and causing injury.
35
49
83
STEP 6
1. Place the safety key (71) on the display.
51
64
71
ASSEMBLY INSTRUCTIONS |
51
64
64
70
9