LifeSpan Pursuit 2 User Manual page 28

Code
No display
appearing on
LCD
LCD Screen
Flashing
LCD Display
Faulty
LCD displaying
but with
dysfunction
Backlight is
not bright
A button is not
functioning
Pulse function
is unresponsive
28| TROUBLE SHOOTING GUIDE
Reason Solution
A. Check if the voltage is correct.
B. Check power to machine. Red on/off
switch should light up.
C. Change the controller.
D. Change the display.
A. Check if the voltage is correct.
B. Change the controller.
C. Change the display.
1. Turn off power supply.
2. Repower the motor, observe if
normal or not.
3. If not, remove display and fixed PCB.
Check for damage.
4. If no damage clean the PCB gold
finger position and retest.
A. Turn off power supply and repower
the motor.
B. Change the display.
A. Turn off the power supply and
repower the motor.
B. Start the display, check if all
wires are connected well. Check for
backlight damage.
C. Change the display.
1.A. If only one key is not working,
open the display and check the
button for damage.
1.B. Replace the display.
2.A. If most keys do not work, restart
the treadmill.
2.B. Replace the display.
A. Wash your hands, test again.
B. Check for damage to the pulse
sensor cables as well as the
connection terminal.
C. Change PCB or display.