LifeSpan Pursuit 2 User Manual page 12

3. BUTTON FUNCTIONS
"PROGRAM": Choose the program, cycle from manual mode, P1 – P12 to FAT.
"MODE": Mode selection button. Press this button to cycle the mode. During standby mode, use
MODE to choose between countdown mode, from TIME countdown, DISTANCE countdown and CALORIE
countdown.
"START": Begins workout. When the power is on and safety key correctly placed on the display, press
this button to start the treadmill after a 3 second countdown.
Pressing the START button once will pause your workout. Pressing START twice will STOP your workout.
"STOP": Press button to stop the motor running and to stop the machine.
Pressing the STOP once button during your workout will pause the workout and data on the LCD will
remain. Press the START button to resume your workout. Instead of pressing START, you may clear the
workout data by pressing the STOP button a second time.
"SPEED+\SPEED-": Increase or decrease speed when exercising. Sets parameters when stopped.
"SPEED 2/4/6/8/10 & 3/5/7/9/11:" Speed adjustment shortcut keys.
Left Handle Bar Buttons: Start/Stop
Right Handle Bar Buttons: Adjust Speed
4. MAIN FUNCTIONS
I. Quick Start-up (Manual)
Attach the safety key. After a 3 second countdown, the treadmill will start and run from the lowest
speed, add and subtract to the speed using the SPEED +/- buttons.
II. Countdown Mode
Press the MODE button to cycle options: timer countdown, distance countdown, calories countdown.
The default value corresponds to the window and flashing display. At this point, the SPEED buttons
serve as plus and minus functions to adjust to the desired value. Press the START, add and subtract
speed by using SPEED buttons once again. When the countdown reaches 0, the machine will stop.
You can also directly press the STOP button or disconnect the safety key to stop.
III. Manual Operation
When in Standby mode, press the "START" button and the treadmill will run at speed 0.8KM/H. Other
windows will begin to record your workout data. Use the "SPEED+", "SPEED-" buttons to change the
speed.
• Setting TIME Countdown: When Standby mode, press the "MODE" button and the "Time" window
will show "15:00" and light up. Use the "SPEED+", "SPEED-", buttons to set the desired workout
time. The setting range is between: 5:00-99:00.
12 | OPERATION GUIDE