Scope Of Delivery; Basic Structure; Battery Operation (Standard); Mains Connection (Optional) - KERN EOA Series Operating Manual

6.2.2 Scope of delivery

Serial accessories:
• Balance with weighing plate and display unit
• Operating manual
• Battery

6.2.3 Basic structure

• Place the balance on a horizontal and solid base.
• Remove lamination sheet from weighing plate or display unit if existing.

6.3 Battery operation (Standard)

If the battery is used up, remove battery cover form the lower side of the balance and
exchange the battery. Reinsert the battery cover.
In order to save the battery, the balance switches automatically off after 3 minutes
without weighing.
If the balance is not used for a longer time, take out the batteries and store them
separately. Leaking battery liquid could damage the balance.

6.4 Mains connection (optional)

Power is supplied via the external mains adapter. The stated voltage value must be
the same as the local voltage.
Only use original KERN mains adapters. Using other makes requires consent by
KERN.

6.5 Initial Commissioning

In order to obtain exact results with the electronic balances, your balance must have
reached the operating temperature (see warming up time chap. 1). During this
warming up time the balance must be connected to the power supply (mains,
accumulator or battery).
The accuracy of the balance depends on the local acceleration of gravity.
Strictly observe hints in chapter Adjustment.
EOA-BA-e-1611 9