Weighing; Taring - KERN EOA Series Operating Manual

7.2 Weighing

Operation
 Start balance by pressing
 Await zero display
 Place goods onto weighing plate.
Now the weight is displayed, after the standstill control
appears the weighing unit [kg] right-hand in the display.
If the material to be weighed is heavier than the weighing
range, the display will show [E] (=Overload).

7.3 Taring

Operation
 Turn on weighing scale
be displayed.
 Place the tare vessel (ex. 3kg) on the weighing plate
and press the
The balance display goes to [0].
 Put the sample into the tare vessel.
Weight of sample is indicated.
 If after finishing the weighing process the
button is pressed again, [0] appears anew in the
display.
The taring process can be repeated any number of times, e.g. when adding several
components for a mixture (adding).
The limit is reached when the whole weighing range is exhausted.
After removing the taring container the total weight is displayed as negative display.
By pressing the
12
.
and wait for zero to
button.
button again, the balance returns to „0".
Display
(example)
Display
(example)

(example)
EOA-BA-e-1611