Table of Contents
Advertisement
Running a protocol
Loading a
Load fluid
22
Thermo Scientific™ Multidrop™ Pico 1 Digital Dispenser Operating manual
When prompted, load a cassette as shown.
cassette
•
clamp (put the handle in the 'up' position) and remove the cassette by
pulling it horizontally toward the front of the dispenser.
•
pushing a new cassette into the cassette holder horizontally towards the
back of the dispenser.
•
downward.
Once you have confirmed that the cassette has been clamped, the
dispenser will detect that it has been loaded and will validate the
cassette.
If the cassette was used in a previous run, the software program will
show the cassette as used.
After the cassette has been loaded, the Load Fluid prompt will appear.
The prompt has an entry for fluids used in the protocol, color-coded
prompt
and number-coded (in concert with the numbered cassette reservoirs)
with stock concentration and the required load volume.
If a used cassette is in the Multidrop Pico, release the cassette
With the handle in the 'up' position, insert a new cassette by
Clamp the cassette by rotating the clamp lever handle
Thermo Fisher Scientific
Advertisement
Table of Contents
