Air Installation - John Bean EHP System III-E Operator's Manual

2.2 Air Installation

WARNING
THE AIR INSTALLATION MUST BE MADE ONLY BY
LICENSED PERSONNEL.
WARNING
EXCESSIVE AIR PRESSURE CAN SERIOUSLY
INJURE PERSONNEL AND DAMAGE THE MACHINE.
Ensure that the line pressure is within the limits
required by the machine. If the air pressure exceeds
12 bar (170 psi) it is mandatory to install a pressure
regulator before the air inlet of the machine
It is suggested that the air supply be equipped with a
water separator and air lubricator.
After ensuring all the above proceed as follows:
A.
FOR ELECTRIC MOTOR POWERED VERSION
ONLY:
Connect the machine to the air supply with a rubber
hose equipped with 1/4"NPT treaded junction.
FOR AIR MOTOR POWERED VERSION ONLY:
Connect the machine to the air supply with a rubber
hose equipped with 3/8"NPT treaded junction.
WARNING
BEFORE CONNECTING THE MACHINE TO THE AIR
SUPPLY BE SURE ALL PERSONNEL ARE CLEAR
OF THE MACHINE AND THAT NOTHING IS LEFT
ON THE TURNTABLE AREA (TOOLS)
B. Should you install any optional accessories, please
refer to the relevant instructions.
18