Advertisement
Routine Maintenance
Always remember to turn off the 5050 and unplug the power cord from the machine before
cleaning.
The operator should clean around the machine every day, including emptying the chaff
container.
The operator should clean the black feed belts monthly. Clean the feed belts using a rag
dampened with cleaning alcohol.
The operator should make sure to empty the chaff container in regular intervals. The
chaff should not be past the red line on the chaff container.
DO NOT CLEAN THE FLAT RED BELT.
All other cleaning and maintenance should ONLY be done by an authorized service technician!
Please contact your local dealer for assistance.
Setting Up
Before starting your letter opener make sure the
chaff container is placed and securely seated
underneath the right side of the machine. The
red line on the deflector should be placed so that
it is directly beneath the red mark on the milling
cutter as seen in Figure 2. If not placed correctly
there will be paper chaff on your table.
Start/Stop
Plug in the power cord and turn the power on by press down on the "l", to turn the power off
press down on the "0". To start the machine press down on the "l" then press down the reset
button.
2
Bottom of
Milling Cutter
Advertisement
