To Ensure Correct Use - Roland CAMM SCRIBE CS-20 User Manual

To Ensure Correct Use

This product is a precision instrument
and must be handled with care.
When the unit is not in use for an
extended period, detach the electrical
plug from the AC outlet.
Removing the Safe-transport Retainers
Retainers are attached at the locations shown below to ensure safety when transporting this product.
Use the hexagonal wrench included with the unit to remove the retainers before use. (Once removed, the retainers should be
stored in a safe place because they are needed again when repacking the product.)
vi vi
Do not install in an area subject to dust,
high humidity or poor ventilation.
When cleaning the CAMM SCRIBE,
make sure that the main unit's power
OFF.
Do not connect to an AC outlet that
supplies other than the specified voltage.
Always allow a minimum gap of 30 cm
(12") on the side where the vacuum
hose exits.
30 cm (12")
or more
Hexagonal
wrench