Axis 2N Indoor View User Manual page 62

Warning Tone Volume – set the volume of warning and signaling tones. The
volume values are relative against the set master volume.
Suppress Warning Tones – suppress signaling of the following operational
states: Internal application started, IP address received and IP address lost.
User Sound Volume – set the volume of the user sounds. The volume values are
relative against the set master volume.
Do not disturb mode for doorbell too – if this function is activated, the device
will not ring when the doorbell is pressed.
3.2.4.2 Display
Set the basic display parameters on this tab.
2N TELEKOMUNIKACE a.s., www.2n.cz 62/112