Axis 2N Indoor View User Manual page 19

Cut a circular hole in the wall of the diameter of 103 mm and depth of 50 mm before
installation. It is assumed that all necessary cables of the maximum length of 25 cm
will lead to the hole. Put the flush mounting box in the hole to make sure that the hole
is deep enough. If the hole complies with the box size, wall in the box and level the
box using a water level on the holding clips. When the mortar hardens, break off the
clips and cap the box with the cover provided. Use anchoring elements to fix the
device into plasterboard.
Tip
Drill template.pdf
For actual fixing of the
Allen key which is included in the box of the
Note
When installing the
relating to installation of electrical devices in flammable material must
be taken into consideration.
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2N Indoor View to the flush-mount box, have the 2.5 mm
®
2N Indoor View
®
2N Indoor View at the ready.
into the wall, the local standards
19/112